How To Erect Curtain Poles
Curtains provide an essential part of any room. They are highly decorative and can be used to filter light, trap heat and add privacy, too. An important part in installing curtains in a room is the erecting of a poll to run these across. It is essential that poles are placed properly so as to avoid functional problems and also to also maximize the window’s appearance.
Choosing the Right Pole.
The first action to take is to measure the window where the curtains are going to be hung to determine the size of the pole needed. The curtain pole should always be slightly longer than the actual window with a surplus five inches being an ideal measurement. This allows the curtains to fully cover the windows when down and also makes it easier for them to be moved fully aside so as to allow in a maximum amount of light.
When deciding which type of pole to buy there are a couple of considerations that need to be made.
Firstly, there is the practical question regarding what is to be hung from the pole. The pole needs to be strong enough to support the curtain’s weight. This means that, for example, curtains made from velvet–a heavy material–will need more support than a lighter alternative made from voile.
A second consideration is price. This depends on materials, also. The more durable types of curtain pole, metal and wood, are the most expensive. Cheaper options, however, may not prove strong enough to hold up heavier materials and thus plastic poles may be ruled out of holding up velvet and similar material curtains.
Positional Marking.
Do not just attempt to put up the curtain pole blind. It is essential to make some marks and measurements before doing so. The best way of doing this is with the aid of a tape measure and a pencil. Make sure the pole will be erected high enough so the curtains will not trail on the floor. Also, if possible, mark the location of the necessary hole for each screw.
Erecting the Pole.
The key to successfully erecting curtain poles is simply to follow the manufacturer’s instructions to a tee. Note that if the window is located in a brick or plaster wall it may be necessary to use a masonry drill bit while a wood drill bit should be used for wooden walls.
Regardless of which surface, protective goggles should be worn throughout all of the drilling process. Holes should be drilled for each of the screws that are to be placed in the wall. The brackets are to be placed over these holes and secured with screws.
Depending on the type of wall, the screws can be inserted with a screwdriver or, if dealing with drywall or similar, with a drill. Check that the brackets are secure and that there are no loose screws. If this is the case then it is not possible to erect the curtain pole and fasten the curtain to it.
About the Author
Kieron Casey is a BA (Hons) Journalism graduate who blogs regularly on a number of subjects including interior design, decorating and curtains.
Email This Post
To Subscribe click on one of these Icons:
